Foshan HENKEL hot melt adhesive
factory in foshan HENKEL hot melt adhesive factory 5, pur hot melt adhesive machine, when to take off the bucket, the way is to five gallons of hot melt adhesive in barrel filling the dry nitrogen, avoid using not dry compressed air directly, if you need filling the compressed air, it is necessary to thoroughly dry compressed air.
If after drying glue have wiredrawing phenomenon of joint, then glue not dry, may be not enough temperature, drying time is too short, and the curing agent and too little or stirring evenly enough.
Foshan HENKEL hot melt adhesive factory, automotive interiors industry: car is the second largest industry, is a big industry, annual production of 22 million cars by 2014 above, China is power from the car to the car power shift.
Water-based glue as long as the general besmear brushs a glue, if material is porous structure, can be two thin rubber, each must be dried before the second times adhesive, glue not dry property of stalemate, does to glue instead.
Foshan HENKEL hot melt adhesive factory and check the usage of the dryer.
However, VOC standard car, but the smell also has many is unacceptable, VOC and the relationship between the odor becomes a research thesis.
Using a dedicated chip shoes repair adhesive glue, small area filling adhesive at room temperature from dry 5 minutes can use hand pressure, large area to the oven, the compressor pressing.
Foshan HENKEL hot melt adhesive factory is used to make their own DIY design you have very different glue guns and decorate, DIY designer generally not long time use, recommend the use of glue guns for DIY friends together to design good work first and then glue glue gun.
Using water-based adhesive to be equipped with the following tools: foshan HENKEL [hot melt adhesive factory
1 - after coating
Organic silicon and other resin pressure-sensitive adhesive composed of organic silicone resin and organic silicone rubber pressure-sensitive adhesive, has excellent high temperature resistance and aging resistance, is a kind of important special pressure sensitive adhesive, its main purpose is to make all kinds of high-grade pressure-sensitive adhesive products.
Attending the surplus glue, glue bowl don't fall back to the packing barrels, so as to avoid pollution of the glue glue in the bucket.
Pneumatic or electric mixer b.
Plastic glue container c.
Plastic plastic container.
Foshan HENKEL hot melt adhesive factory with the increase of the main chain of carbon atoms, the melting point of polyethylene phthalein amine is reduced, and the melting point of vinegar is increased.
Seven, pur moisture reactive polyurethane hot melt adhesive machine general in the maintenance of machinery safety precautions: poly cool from the binary acid and glycol, polyethylene phthalein amine from dibasic acid and diamine.
Below small make up is detailed to introduce the product sell like hot cakes on the exhibition.
Foshan HENKEL hot melt adhesive factory test for 2.
In unit mixer, constant pressure drop funnel, reflux condenser and the 250 ml of the thermometer three flask, add 2.
Ethylene alcohol and deionized water 90 g 5 g.
By bonding surface treatment: hot melt adhesive for bonding material surface treatment no other adhesive is so strict, but be dust on the surface of the adhesive material, oil should also do the appropriate processing, their best to make the hot melt adhesive glue.
Car interior environment, people can't stand more and more harsh indoor environment, car brands made the car interior environment standard, standard for VOC.
Foshan HENKEL hot melt adhesive factory
Anhui Sinograce Chemical Co., Ltd. is dedicated to servicing our customers with a wide array of high-quality service and products.
Anhui Sinograce Chemical Co., Ltd.’s mission is to provide high quality care and services to our members and to be profitable in the process.
Anhui Sinograce Chemical Co., Ltd. will give you a suitable price for purchasing chemical company.
Although the core manufacturing factor of chemical company is high technology, smart customers know that we need to enhance our material quality and producing standard.