Guangdong German adhesive
contact guangdong German adhesive contact 6, in any case, don't touch may be exposed to the outside world of wire connection or other wire connection and not loose components.
Specifically, PUR hot melt adhesive moisture curing principle is as follows: relatively thin ink, using time is shorter and thicker ink, will takes long problems.
PUR hot melt adhesive, the adhesive heating molten fluid, coated in glued base material surface, the two glued laminating, colloid at the beginning of cooling rapidly generating viscous force positioning effects (
The colloid and the moisture in the air or glued trace moisture of base material continues to function, chemical crosslinking reaction, chain extender (
After the crosslinking reaction polymer with high cohesion, once cured, then show special waterproof, high resistance to chemical corrosion resistance and weatherability.
From the late 1970 s, hot melt adhesive to begin to enter to wood industry, used for sealing side, plywood core, plate joining together, such as furniture tenon joint, early hot melt adhesive equipment is mainly dependent on the United States, west Germany, Italy and other countries of equipment, along with the hot melt adhesive equipment has become increasingly mature, stable, selection and use is suitable for the hot melt adhesive equipments of the furniture factory details, not only can improve the quality of the furniture and class, and can improve the production efficiency, reduce the difficulty of the panel is renovated, reduce labor intensity.
Hot melt glue gun is frequently used tool, especially when decorating a room.
Commonly used in material coating purposes.
Have precise effect of open circuit, a variety of nozzle, can satisfy different requirements, the unique design of filter for cleaning and other characteristics, widely used.
(4) cover plate;
The automotive industry (
Conductive polymer adhesive demand increase the flow of free electrons from the molecular structure, so as to solve the electrical conductivity of the polymer materials.
A variety of usage of hot melt adhesive, the life of a hidden artifact hangers skid would clothes?
Phone line fault is not willing to throw?
The blade naked too?
The closet door shutting too big?
Now the life need a glue gun can be all done!
Don't let hot melt glue gun idle, let it go and live to Duan Junzi glue.
Is corrosive and has a flexible products, can be felt a lot of base material, in a wider temperature range still has very good performance, and resistant to most chemicals
and various climate environment.
The glue adhesive contact in Germany [guangdong
Applicable to BOPP film/printing, PET laser machine/products combined with technical indicators of the note packaging and storage pressure sensitive adhesive can be divided into crosslinked type and the crosslinking type pressure sensitive adhesive.
Antioxidant hardness is 78 -
82, 65 -
75 furniture USES hot melt adhesive is a kind of special to the man-made plank paste adhesive, it is a kind of environmental protection, solvent-free thermoplastic rubber.
After 12, changing the pur polyurethane hot melt adhesive, must wait for pur hot melt adhesive machine heating at least 20 minutes before start the pump and motor, such as immediately start the pump and motor can cause polyurethane gear pump damage, reduce the service life of pur hot melt glue machine.
Into the glue guns opened the package, in the packing of the hot melt glue guns tend to have a little support, the small bracket installation in gun two holes on the surface of the whole.
With bracket live hot melt glue gun, so will not spoil the table.
Clean with clear water after using machinery and equipment, improve the production environment, eliminate electrostatic fire accident oily products combined with process, ensure the products according to the production personnel health laminating process to adjust the indicators, when using, do not add water or other solvents should be tightly covered at any time, in use process to prevent liquid cement crust, don't entrance, can not let children please don't contact with other products mix, not finished product should be kept sealed.
Water-based glue can not more than 5% of the water against, but to fully mix, or glue layer will effect the stalemate.
Beverage purification of an innovation is to use food to purify silicon Sylopute to remove harmful substances from the food.
Guangdong German adhesive contact material floolwing couldn't do the transparent products, make ordinary products material floolwing is not greater than 35%, the ratio of shuikou material can reach the requirement of low products.
Screen printing ink is a bit thick, and in addition to dry, color can't own curing down, need check equipment, and the curing time is can change with the thickness of the ink.
chemical factory chemical company is liked by everyone and is used in every household.
is a chemical factory chemical company provided by Anhui Sinograce Chemical Co., Ltd. which is a leading manufacturer in China. For more information, visit Sinograce Chemical.
People tend to want what they perceive they cannot have. Making Sinograce Chemical seems exclusive or as if it will go out of stock if they don't act quickly often makes it more enticing to the consumer and increases the likelihood that they will buy in.
There are so many factors that businesses have to weigh when producing chemical company, and we are not going to pretend to grasp all of them.
For optimal chemical factory, choose a high-quality chemical company system and make sure a certified installer sets it up.