Hohhot fule like Hohhot fule binders how any time in July and disassembling pur polyurethane hot melt adhesive
machine under the condition of pipes, spray adhesive glue guns, must be immediate use of silicone oil could bare pur hot melt adhesive sealed, avoid moisture curing reaction.
(1) the fabric paste with hot melt adhesive is due to the consumption of silica gel after refining and sterilization, can be directly when mixed with food according to the requirement and guarantees the drying of food and food to eat together, but without any poison to the human body.
Simple conductive adhesive and two basic performance has been unable to meet the requirements of electronic devices, also need more conductive adhesive has excellent properties of thickness: 0.
Melting temperature: 205 mm - 120
10-160 ℃ stress:
20 pounds per square inch hot melt time: 3 -
30 seconds main models: 3 m615, capa H192 TESA8475, TESA8432, thoughts, etc.
Adhesive for sewing can reduce labor intensity, garment and clothing made of fine, fit, strong strong.
Used in fabric paste mainly include polyamide hot-melt adhesive, such as cheese and polyurethane.
(3) : late because of the small water molecules than solvent-based adhesive, can penetrate into the surface of the material smaller pore, equivalent to cast anchor in the material surface, its late on and solvent adhesive, with some suitable for cast anchor porous materials, such as mesh cloth and EVA, the late strength is better than solvent-based adhesive;
(3) glue barrel stacked shall not exceed 4 layer;
Avoid direct sunlight and rain;
3 type water-based glue suitable shoes and shoes (4) the warehouse should be set temperature and humidity meter, advice within 5 ∽ 30 ℃, temperature control and record every day, such as the temperature is beyond the scope suggested, should take timely improvement measures, to ensure that the water-based adhesive
The rapid development of the electronics industry to drive the further development of conductive adhesive.
(2) the lining cloth processing with hot melt adhesive, hot melt adhesive was heated to a definite temperature by solid into molten, namely when the coating to or sealing side of man-made board base material surface, cooling into a solid, the material with the base material of adhesive.
Adhesive lining cloth is on fabric surface evenly Xu Bu made of hot melt adhesive.
When used to adhesive lining cloth cut into the required shape and size, to be coated with hot melt adhesive side with other fabric materials (
On the back of the hot-pressing bonding.
It lining in the clothing layer, as a skeleton of a garment, simplifies the clothing processing technology and time, make the garment with light, beautiful, comfortable, insurance type, washable, durable effect.
Lining cloth processing general requirement for hot melt adhesive is a colorless, odorless, texture soft, rapid bonding, resistance to wet and dry wash, cannot have an effect on fabric, light resistance, etc.
Can use a variety of hot melt adhesive lining cloth processing, almost all types of hot melt adhesive can be used, with much is ethylene -
Vinyl acetate (
Hot melt adhesive, polyamide hot melt adhesive and high-pressure polyethylene (
Hot melt glue powder, and different USES of hot melt adhesive and processing methods are also different.
Hohhot fule adhesive how team members must go through professional knowledge training, have the professional knowledge of odour, no smoking, drinking, diet excitant food and sense of smell sensitive, has the characteristics of justice, fairness, integrity.
Moderate hardness, better toughness, medium liquid, adhesive force is strong, easy to operate.
(3) the carpet back glue with the smell of hot melt adhesive of different enterprises have different testing standards, to simulate the hot melt adhesive application requirement is to smell method, such as the same amount of the same kind of hot melt adhesive in different size but same sealed in the jar, heated to a certain temperature point, after how much time to take out the cooled to room temperature, open the lid and smell by testing personnel, it is concluded that the respective side value, record down, do three - over and over again
Five times, it is concluded that the average for the final test results.
How about Hohhot fule adhesive resistance to low temperature hot melt adhesive suitable for hot melt glue gun, machine, used for bonding wood, paper products, fiber products, leather, metal, plastic, especially suitable for export and cold area, using the low temperature region, high adhesion, no glue falling, no crack belongs to high-grade hot melt adhesive products, non-toxic, conform to the requirements of environmental protection.
Market features: 3, can put the hot melt adhesive melt after testing the tensile strength, tensile strength is not qualified with poor hot melt adhesive.
Anhui Sinograce Chemical Co., Ltd. have expanded from facilitating conversation and collaboration in the identity industry to providing strategy consulting services, research, analytics and education.
Anhui Sinograce Chemical Co., Ltd. supports these goals with a corporate philosophy of adhering to the highest ethical conduct in all its business dealings, treatment of its employees, and social and environmental policies.
So, what's a manufacturer to do? Familiarize ourselves with producing chemical company in various technologies.