How much is the whole series of hot melt adhesive in anhui anhui how much is the whole series of hot melt adhesive catalyst choice not only depends on the kinds of monomers, but also depends on the adhesive drill agent USES.
5, good quality hot melt adhesive with heat resistance performance, can put the hot melt adhesive in zero or more than 40 degrees respectively environment for testing, if there are brittle, soft gelatin said quality is bad now.
Flexible can be good to very good, the weather.
At present good quality hot melt adhesive can be used in the field of industrial manufacturing, heat resistance performance and flame retardant performance is guaranteed, the current can reach the quality requirements must be big brand products, such as ke, Moore, focus on the study of the hot melt adhesive, provide customized hot melt adhesive application solutions, wide range of USES, can be applied to new energy, military industry, aviation, shipbuilding, electronics, automobiles, instrument, power supply, high iron, and other areas of the industry.
If used in food packaging, it shall comply with food hygiene requirements.
Can be divided into two components of catalytic curing, one-component UV curing or thermal curing.
Although some hot melt adhesive at the time of operation will be some smell, but is completely disappeared after curing, so the hot melt adhesive is safe, can be used in electrical parts of adhesive.
1, EPE packaging industry, electrical appliances, shockproof anti-throw EPE packaging materials packaging assembly parts, electrical appliances manufacturer for rubber end users without peculiar smell, and in the production of EPE packaging manufacturer assembly process, coating machine is open, a local heating temperature is high, production workers allergic to special smell, think there's a smell is poisonous, the influence is healthy, require a safe working environment, so the smell of extremely strict requirements are put forward for hot melt adhesive, require hot melt adhesive has no smell.
How much is the whole series of hot melt adhesive in anhui test principle for 25 mm in width and thickness of 0.
Two-way stretch polypropylene film)
Membrane evenly coated with a layer of adhesive solution, in the oven drying under 100 ℃ for 5 min, then take place after 30 min wash paste in the drying of stainless steel sheet, with heavy compaction, and then in the oven drying under 50 ℃ for 5 ~ 7 min.
Aerospace industry (2) with the floor of the lining board and ceiling and purlin and rafters adhesive, have the effect of butyl girder;
(3) the quality of the glue is light and good durability.
2, sanitary products industry: in recent years, the baby diapers, sanitary napkin, adult MATS and other health care products industry puts forward very high requirements on the smell of hot melt adhesive, require hot melt adhesive has no smell.
Along with the development of society and economy, people more and more rich, the quality of our products have higher requirements, combined with the present status of a Chinese have only one child, who all hope that their children can enjoy the treatment, even if the baby diapers, also hope that the children can use safety, and the smell of the product is absolutely not acceptable.
So in order to cater to the terminal customers, health supplies manufacturers require health supplies of raw materials manufacturers of materials, which is understandable.
Polyurethane type: single-component or bi-component products, for most materials have good bonding performance, and wear resistance.
Anhui 7, how much is the whole series of hot melt adhesive for the special structure of pur hot melt adhesive machine pressure plate to clean up, due to the special structure of pur hot melt adhesive machine heating plate can't clean up in a short time more than pur polyurethane hot melt adhesive, more than in clean dry nitrogen protection must be used in pur polyurethane hot-melt adhesive, and adhesive time should not more than 10 minutes, shall not use any hard tool to clean up the pur hot sol hot plate machine.
Six, printing ink, glue viscosity of the relationship between control and residual ink, glue,
Crosslinking modification is an effective method to improve the performance of waterborne polyurethane
, film can be improved water resistance, heat resistance and bonding strength.
Many of us have heard about chemical company and seen some of these units in operation in chemical factory, chemical factory and chemical factory spaces.
have become more diverse in appearance and function thanks to the advanced technology. Choose a that you can trust to deliver an excellent user experience reliable performance at Sinograce Chemical.
Anhui Sinograce Chemical Co., Ltd. undertakes all maintenance duties for chemical company facilities and organizations and conducts all the security and surveillance for the properties.