Jining HENKEL water-based glue dealers jining HENKEL water-based adhesive
distributors in the following table: the composition of pressure sensitive adhesive.
Secondly inserted the glue stick glue guns, turn on the juice and turn on the switch.
By this time will bright lights on the glue guns, glue guns in heating condition.
Generally only need to wait a few minutes later, glue guns can hit the glue.
9, the pur hot melt glue machine press pressure plate into the plastic bucket, can be appropriate in the daub on the seal of the pressure plate do a small amount of silicone oil lubrication, lubrication, between the pressure plate and rubber barrel to protect the use of the seal ring.
Solvent-free technology according to the theory of interface, the interface between the glued object contact closely, interface distance less than 1 nm, make glued end into electronic is to the body, the other side as electron donor and polarity.
Prolong the service life of the glue guns in these regulations, food purification silicone Sylopute can be used as Japanese food industrial filters.
Used to make their own DIY design you have very different glue guns and decorate, DIY designer generally not long time use, recommend the use of glue guns for DIY friends together to design good work first and then glue glue gun.
Jining HENKEL water-based glue dealer shall be conducted according to GB/T 2792.
Sylopute was placed on the current food hygiene law the provisions of the tax law and wine.
The reason is very simple, if you are using a glue gun, glue gun long time heating, gun body has been heated glue flowing slowly.
If too little glue gun body, and inside is empty, it will be very easy to burn out.
More than ten minutes generally don't use or power supply, avoid burn out.
The test result is pressure sensitive adhesive can stick 5 ball.
Silicone sealant generally easy to extrusion, easy to handle.
Pay attention to safety when using jining HENKEL water-based glue distributor 3, checking and adjusting pur don't remove the moisture reactive polyurethane hot melt adhesive any parts of the machine unless you have enough knowledge of equipment performance.
Technical indicators glue after draping, drying temperature for 80 ~ 110 ℃, depending on the requirement of the product and the draping speed adjust packing and storage solvent laminating adhesive editing features solids 50 + / - 1% (
5℃/ 3 h)
Brush or roller coating glue is 20 kg, 50 kg bottled preparation editor to add polymer gel of liquid increased adhesion
agent, curing agent can get pressure sensitive adhesive products.
Glue gun is to use the principle of heating melting glue and the glue, this feature makes the glue gun itself in part of the heating temperature is very high, must be protected when using, or exposed to high temperature part is easy.
Even ready protection measures also need to be careful in use process, avoid.
Universal sealant is very good, has the good weather resistance, wear resistance, resistance to moisture and ozone.
For most of the base material with high bond strength, sometimes even more than the strength of the base material itself.
Jining HENKEL water-based glue distributor of pressure sensitive adhesive adhesion resin rosin ester, phenolic resin, petroleum resin, etc.
Join the right amount of antioxidants to prevent premature aging of EVA hot melt adhesive.
Anhui Sinograce Chemical Co., Ltd. specializes in undertaking corporate offers to cater the needs of different companies.
To find an ideal of your need, please visit my site Sinograce Chemical.
chemical company is attracting a great positive feedback from the customers. And many of our clients are fully satisfied with it.
With this competency, Anhui Sinograce Chemical Co., Ltd. provide high technology and assist customers to create added value and contribute to the development of producing chemical company.