Nanyang HENKEL complaints nanyang HENKEL sealing glue sealing glue complaints a bisulfite persulfate initiator system, for example, you can through the following reaction generates free radicals: 1.
180 ° peel strength test of the jinan lincom mechanical and electrical technology co. , LTD. (XLW series intelligent electronic relay testing machine
According to the GB -
Secondly inserted the glue stick glue guns, turn on the juice and turn on the switch.
By this time will bright lights on the glue guns, glue guns in heating condition.
Generally only need to wait a few minutes later, glue guns can hit the glue.
Technical indicators glue after draping, drying temperature for 80 ~ 110 ℃, depending on the requirement of the product and the draping speed adjust packing and storage solvent laminating adhesive
editing features solids 50 + / - 1% (
5℃/ 3 h)
Brush or roller coating glue is 20 kg, 50 kg bottled preparation editor to add polymer gel of liquid increased adhesion
agent, curing agent can get pressure sensitive adhesive products.
Automotive adhesive must satisfy some special to beg, these requirements are basic has nothing to do with the performance of the adhesive joint, must be easy to use under the following conditions: (1) basic is not skilled workers, often frequent transformation;
(2) the production rate is high (
Fixed time, each operation for short;
(3) bonding surface only limit cleaning (
May also have oil)
(4) to the health and safety standards allow lower limit;
(5) curing time, pressure and temperature can vary slightly, and requirements and technological process of the lacquer that bake or match the material of low thermal deformation temperature;
6. Want to avoid the mixed accurate weighing and complex.
Prolong the service life of the glue guns used to make their own DIY design of glue guns and decoration are very different, DIY designer generally not long time use, recommend the use of glue guns for DIY friends together to design good work first and then glue glue gun.
Nanyang HENKEL sealing glue complaints because colloid when molten high temperature oxidation decomposition, adding antioxidants can guarantee under the condition of high temperature, bonding performance does not change.
The reason is very simple, if you are using a glue gun, glue gun long time heating, gun body has been heated glue flowing slowly.
If too little glue gun body, and inside is empty, it will be very easy to burn out.
More than ten minutes generally don't use or power supply, avoid burn out.
Adhesive structure applied in automobile industry are: (1) body and roof reinforcement plate;
(2) double shell roof;
(3) both inside and outside board hood;
(4) brake shoe (5) of the clutch and transmission belt;
6. The window seal;
All landowners plastic baffle;
Today disc brake friction lining block;
Pet-name ruby glass fiber reinforced plastic (
Body panels (
Sports cars and trucks, attending the radiator tank;
11 plastic floor.
Pay attention to safety when using nanyang HENKEL sealing glue complaints glued object does not use any adhesive, and adhesive.
Clothing with poly phthalein amine hot melt adhesive machine reference formula for quality of nylon 100 salt, 85 quality of nylon 6 a 'salt, 150 quality of nylon 1010 salt.
Glue gun is to use the principle of heating melting glue and the glue, this feature makes the glue gun itself in part of the heating temperature is very high, must be protected when using, or exposed to high temperature part is easy.
Even ready protection measures also need to be careful in use process, avoid.
Universal sealant is very good, has the good weather resistance, wear resistance, resistance to moisture and ozone.
Solvent-free technology according to the theory of interface, the interface between the glued object contact closely, interface distance less than 1 nm, make glued end into electronic is to the body, the other side as electron donor and polarity.
Nanyang HENKEL sealing glue complaints test result is pressure sensitive adhesive can stick 5 ball.
(5) the load and spare parts;
In the auto industry,
Including cars, trucks, motorcycles, and related transportation)
Application of adhesive to process is simple, reliable performance, economic efficiency;
Used for metal, plastic, fabric, glass, rubber etc itself or mutual connection and paint on the surface of the structure, fixed and seal.
chemical company is not something to be ignored or taken for granted. It is there to keep your chemical factory comfortable year round. To find a cost effective solution, turn to Anhui Sinograce Chemical Co., Ltd..
Anhui Sinograce Chemical Co., Ltd. is one of the best provider in China offering online chemical company consultation and products to boost your chemical factory. Visit Sinograce Chemical and place your order now.
Anhui Sinograce Chemical Co., Ltd. can assure you that we never compromise on our quality standards and are one of the best in the market at present.