Professional chemical products supplier

Industry News

Home  > NEWS  > Industry News  > 

Paint of water-based paint - Waterborne wood paint application process 2

Paint of water-based paint - Waterborne wood paint application process 2

2019-09-10

Before using the soft brush, thoroughly soak it in clean water, remove excess water, and do not drip. The enamel paint should only reach half the length of the bristles.Brush as fast as possible, gently and smoothly brush the wood grain, and do not apply it back and forth repeatedly. Because the water-based paint dries quickly and the opening time is short, it should be completed as soon as possible.Generally, a water-based primer is applied before coating the water-based putty to improve the infiltration of the paint on the wood and increase the adhesion. In addition, multiple primers can be applied on the polished putty to increase the thickness and fullness of the paint film.

For occasions where the requirements are not high, the primer can also be used as a top coat, the so-called bottom-type water-based wood lacquer.The primary role of the first primer is the back cover. When painting, the paint liquid should be thin. It can be added with 5%~30% water and diluted to make the paint liquid easily penetrate into the pores of the wood, which is beneficial to increase the adhesion of the paint film.After the first paint is dried (depending on temperature and humidity, it takes about 2~8h), use 400#~600# sandpaper to remove the burrs from the surface of the wood, so that the surface is basically smooth and ready to be putty.The greasy soft brush should be fully wetted in clean water before use, remove excess water, and must not drip. The enamel paint should only reach half the length of the bristles. Brush as fast as possible, gently and smoothly brush the wood grain, and do not apply it back and forth repeatedly. Because the water-based paint dries quickly and the opening time is short, it should be completed as soon as possible.

Generally, a water-based primer is applied before coating the water-based putty to improve the infiltration of the paint on the wood and increase the adhesion. In addition, multiple primers can be applied on the polished putty to increase the film thickness and fullness.For occasions where the requirements are not high, the primer can also be used as a finish paint, the so-called bottom-type water-based wood lacquer.The primary role of the first primer is the back cover. When painting, the paint liquid should be thin. It can be added with 5%~30% water and diluted to make the paint liquid easily penetrate into the pores of the wood, which is beneficial to increase the adhesion of the paint film.After the first paint is dried (depending on temperature and humidity, it takes about 2~8h), use 400#~600# sandpaper to remove the burrs from the surface of the wood, so that the surface is basically smooth and ready to be putty. The brushing process of greasy water-based paint is mainly used in the home improvement market.


Chat Online 编辑模式下无法使用
Chat Online inputting...