Sichuan professional pressure sensitive adhesive
factory in sichuan province professional pressure sensitive adhesive factory [
The experiment reagent 4.
Latex solid content first made a small box, aluminum foil with electronic analytical balance according to its quality, record the value.
Glue dispensing quantity according to the work experience, the size of the adhesive dot diameter should be the half of bonding pad spacing, the size of the adhesive dot diameter should be adhesive dot diameter after patch 1.
Five times, so that can ensure that there is enough glue to bonding elements and avoid excessive glue bonding pad and glue machine dispensing quantity depends on the length of the rotation of the screw pump to decide, practice should be according to the production situation,
Room temperature, glue viscosity, etc. )
Selection of pump rotation time, manufacturing defects which were liable to occur during the following process: glue dot size is unqualified, wire drawing, glue impregnation welding plate, curing strength is bad off so easily, solving the problem of the glue machine should be various technique parameters, overall research to find a solution to the problem.
Since the early 1970 s, polyurethane adhesive for the generation of polysulfide, used to install the windshield and rear window.
Water-based coating glue with water as solvent or polyurethane acrylate resin through specialized emulsification equipment, emulsion.
Its advantage is: many varieties, environmental protection, low prices.
Now there are a lot of coating is done with water soluble glue, such as general water soluble pa, water soluble pu and leather adhesive, oil wax feeling, the feeling of color paste and other functional material.
Water soluble with its functional and environmental protection, and the price is low, will be the future direction of coating.
Defect is poor film-forming, washing fastness, pu can't stick hot glue.
Solids 50 + / - 2% health and safety of 20 kg, 50 kg bottled product use machine good adaptability, high peel strength, good ink, 礚 powder capability is strong, the early stick with a viscous fluid manner, can replace the existing solvent laminating adhesive used on dry laminating machine look pale yellow viscous emulsion should stir well when using stored in shady and cool place, avoid direct sunlight, keep the temperature is 5 ~ 40 ℃ industry use of pressure-sensitive adhesive are mainly four categories: solvent-based emulsion pressure sensitive adhesive, pressure-sensitive adhesive, hot melt pressure sensitive adhesive and radiation type of pressure sensitive adhesive.
Structural adhesive in the car on the other is the adhesive assembly of glass and metal.
Oily coating adhesive is oily solvent (
Toluene, DMF, butanone, etc. )
As a solvent, dissolve or polyurethane acrylate.
Its advantage is good film forming, good color fastness, pu can stick hot glue, is the current commonly used coating glue.
Defect is due to the use of the oily solvent, so environmental protection lacking a bit, especially now that oil prices, oil solvent prices soaring all the way, most of the coating glue due to the cost is too high, so use more bad of the oily solvent, leading to environmental protection is not up to standard, in addition with the national environmental standards to further improve, so for environmental requirements of the coating adhesive is higher and higher.
Because there was no solvent, lumber moisture content is not change, no fire and poisoning.
Hot melt adhesive is a kind of plastic adhesives, to a certain temperature range with the temperature change and change its physical state, and chemical properties unchanged, its non-toxic tasteless, environmentally friendly chemical products.
Is the use of hot melt glue by heating the hot melt adhesive, hot melt adhesive machine melt glue after become a kind of liquid, by hot melt adhesive machine hot melt rubber hose and hot melt glue gun, to be adhesive surfaces, hot melt adhesive cooling after completed the glue.
Of course the advantage to play out of the hot melt adhesive in bonding, must use high quality hot melt adhesive and the corresponding quality reliable performance of hot melt adhesive machine to match them.
Sichuan professional pressure sensitive adhesive factory printing and packaging adhesive is of all kinds of outer packing paste glue class collectively, von adhesive printing and packaging including the sticker adhesive, plastic aluminum plating film transfer paper, PP film combined with glue, hot-pressing aluminized film, PET aluminum plating film adhesive and resistance to solvent laminating adhesive, printing after to dry water-based laminating adhesive, water-based glue, all water mouth glue, water-based environmental protection pasting glue.
Water-based glue because volatilizes slower, must add 5% of waterborne curing agent, and mixing 5 -
8 minutes, mix evenly, add the curing agent of glue must be finished within 4 hours, do not use the next day.
Water-based glue process characteristics in sichuan province professional pressure sensitive adhesive factory again into the glue in a small box in the sample, according to its quality, record the value.
Food purification silicone Sylopute in the production process of liquid food, show its ability, such as wine, fermentation sauce, soft drinks and cooking oil.
(1) using water-based glue, in line with the shoe industry, a long-term trend in brands actively, water-based adhesive
has been widely used all kinds of shoe factory, water-based glue quality gradually progress and stability;
Let's look at the characteristics of offset printing ink, compared with the silk screen, printing ink layer thinner, thin will have a drawback, simple sense is bad, visual effect is weak, there would be no stereo effect.
Food purification silicone Sylopute have a series of purpose and function, such as preventing beer, sake, wine and so on become cloudy, reduce wine, turbidity and improvement of soy sauce and soft drinks beer foam keeping ability.
Professional pressure sensitive adhesive factory in sichuan province
If you have a need for chemical factory chemical company, like , and , you need to be able to find a dependable provider who you can trust when necessary.
To be the safest, most progressive domestic chemical company, relentless in the pursuit of customer and employee excellence.
Increasing consumer awareness and rising concern about improving chemical factory are driving the market of products.
As the full potential of chemical factory lies in , the demand for is increasing globally, and is being adopted across the global market.
Anhui Sinograce Chemical Co., Ltd. have found that nurturing relationships with clients by welcoming them to our factory can be valuable to all parties.