Putian putian HENKEL sealing glue dealers HENKEL sealing glue distributor of pressure sensitive adhesive performance including adhesion
and viscous, price usually use three indexes: the early viscosity, viscosity and peel strength.
Are countries with a deficiency of timber in our country, in addition to a small amount of high-grade furniture use real wood, furniture mostly usually use fiber board, wood shavings or sawdust plate production, and furniture plate edge parts must use hot melt adhesive to glue sealing side materials, increase the aesthetic feeling, like solid wood furniture.
The use of hot melt adhesive technical indicators are as follows: appearance: white is slightly yellow granular or stick.
Putian HENKEL sealing glue distributor some hot melt adhesive and hot melt glue user has a different smell of hot melt adhesive test method standard.
10, clean hot melt adhesive plastic cylinder, avoid the use of fireworks or sharp hard tool, in order to avoid scratch pur hot melt adhesive machine heating plate of teflon adhesive coating.
Melting point: 70
Has strong water resistance, solvent resistance, long-term alcohol abuse bubble not degum machine set clean water after use, improve the production environment, eliminate electrostatic fire accident oily products combined with process, to ensure production personnel health considerations if glue stick on the skin, can clean water and soap.
Relative hardness: 70
The curing speed: 8 -
Putian HENKEL sealing rubber pressure-sensitive adhesive products dealers thermoplastic powder coating including pressure sensitive adhesive tape and pressure-sensitive adhesive, pressure sensitive film label paper three categories.
There are mainly polyethylene (
And polyvinyl chloride (
Of two kinds of powder coatings.
Used in the cages with fish, the road guardrail, basked themselves, rack, refrigerator insulation, fan cover, etc.
According to the need to make all sorts of color, coating on the surface of metal products protection and decoration effect.
Putian HENKEL sealing glue 2 dealers.
Water-based glue is introduced 6.
Water-based glue storage guide (1) water-based glue with water as solvent, drying process, there will be no VOC emissions, thus water-based glue is environmental friendly products;
Because do not use organic solvent, and because the range of the cost of crude oil prices rise is much smaller than solvent-based adhesive, relative to the solvent adhesive, water-based adhesive has cost advantage;
(1) the warehouse should be managed by accepted the professional training of personnel;
The destruction of the pressure sensitive adhesive interface of destruction and sub destroyed two main forms, including interface damage is caused by the base material 'sticky' poor, mainly depends on the adhesive strength between adhesive and the substrate, and sub damage is mainly caused by low adhesive own cohesive strength.
Odor test: (3) cost: water-based glue consumption is 1/3 of solvent-based glue, if the water 3 times of unit price shall not exceed the solvent adhesive, replace solvent-based adhesive with water-based glue will not increase the cost, as crude oil prices rise, the cost of the solvent adhesive is bigger than water-based glue rise, in the long run, water-based glue process cost lower than that of solvent adhesive process.
Performance: LOPE coating PVC coating (
Hydroxyl ethyl methacrylate 0.
74 g test results by above knowable, pressure sensitive adhesive performance is stable, the three major performance can be well balanced good color: according to the purpose in accordance with the selected use selected size: 80 -
120 mesh metal adhesion: good optimal models: OSD hot melt glue, hot melt adhesive film is mainly divided into two major categories of thermoplastic and thermosetting nameplate is mainly used in electronic products, plastics, hardware, mobile phone window frame and the front cover of the adhesive;
Even in the uneven surface of adhesive also can obtain good effect.
Used by the tool before drying of glue can be used warm water to clean.
Solids and contains no solvents, non-toxic environmental protection, energy saving, won't produce secondary pollution to the environment;
Although some hot melt adhesive at the time of operation will be some smell, but is completely disappeared after curing, so the hot melt adhesive is safe, can be used in electrical parts of adhesive.
Putian HENKEL sealing glue dealers
Anhui Sinograce Chemical Co., Ltd. is one of the most-trusted manufacturing suppliers to the domestic markets.
To be the safest, most progressive domestic chemical company, relentless in the pursuit of customer and employee excellence.
Anhui Sinograce Chemical Co., Ltd. attach great importance to the quality of our products and R&D services.
We are professional in manufacturing chemical company, and always emphasize the technology and quality during the producing procedure.