Shantou shantou henkel glue factory henkel glue factory used tools before drying of glue can be used warm water to clean.
6 does note glue can also lead to immediately after pressing glue, especially larger rebound parts;
If you are unwell seek immediate attention should be paid to prevent frostbite, will destroy the performance under 0 ℃ storage for a long time, many different kinds of pressure sensitive adhesive
, can be classified from different angles.
In many products, such as thermal transfer printing, sealing liquid crystal materials, wallpaper anti-counterfeiting grade, calligraphy and painting paper, computer printing, food, wire and cable production date type code is the performance of the application of hot melt adhesive, but cannot use the existing granule or powder form, not in a suitable solvent is made under the existence of liquid, the coating on a substrate, thin and uniform film, may be used in process after the production.
7 after pressing shoes again in a short period of time to put in the oven baked does also leads to glue;
Therefore, must use room temperature curing adhesives.
Today hardener added amount is accurate right amount, will affect the early stages of the water-based glue then force and heat resistance;
Technical indicators PH 6.
5 to 7.
5 if the glue on the skin, can clean water and soap.
Pet-name ruby water-based adhesive and curing agent itself resistance to yellowing effect is very good, use water-based glue then the yellowing of shoes with other factors, such as agents, UV irradiation and so on.
Packaging used in water-based adhesive, water-based adhesive, car use water-based adhesive, shoes, daily use water-based adhesives water-based adhesive a.
Pneumatic or electric mixer b.
Plastic glue container c.
Plastic plastic container.
Waterborne polyurethane (
Adhesive APU is water instead of organic solvent as a new type of polyurethane dispersion medium system, also known as polyurethane or water-based polyurethane water dispersion of polyurethane, river systems.
Waterborne polyurethane with water as solvent, no pollution, safe and reliable, excellent mechanical properties, good compatibility, easy modification.
Shantou henkel glue factory in recent decades, types of pressure sensitive adhesive with rapid growth, acrylic ester, water glue the constantly emerging of the new type of pressure sensitive adhesive (
The acrylate pressure-sensitive adhesive research and application of common)
And gradually replaced the traditional type of natural rubber (
Zinc oxide adhesive plaster)
Pressure sensitive adhesive.
Because of the solute (
Hot melt glue)
Different kinds of solvent hot melt adhesive can be made of a variety of utility.
Pressure sensitive adhesive in wound treatment, bonding devices (
Such as ecg electrodes, electroencephalogram (eeg) electrodes and percutaneous electrical stimulator, etc. )
Equipment and products to physical (
Such as colon and ileal dissection device, tracheostomy tube and electricity open surgery surgery with ground mat, etc. )
, transdermal drug release patch, all kinds of labels, binder, tape is widely used, and many other aspects.
The APU adhesive non-toxic pollution-free, high molecular weight so that it can form good performance of the adhesive film, it has good low temperature resistance, good flexibility, adhesive ability and the advantages of wide range of physical properties of the film can be adjusted;
Flexible chain, has in its molecular structure shows good impact resistance, fatigue resistance, low temperature resistance, also has the design, the performance of rubber from the flexible and rigid arbitrary adjustable, can meet the demand of adhesion between different materials;
At present, the synthesis of waterborne polyurethane
adhesive has been relatively mature, basically has the following several ways: shantou henkel adhesive glue factory is also used in large equipment, such as generator, transformer and other high temperature operation of the equipment, and must be under bad environment and high shrinkage article 20 ~ 40 years of equipment operation.
Shantou henkel glue factory use glue, please don't add water to glue, otherwise it will affect the work of bonding strength to maintain good health habits, please do not mix with other products, not finished product should be kept sealed.
Anhui Sinograce Chemical Co., Ltd. supports their market leadership with savvy marketing skills to create an prime brand.
To build customers value by delivering high-quality products, services and solutions in innovative and cost effective ways. Anhui Sinograce Chemical Co., Ltd. will realize this mission by setting the highest standards in service, reliability, safety and cost containment in our industry.
chemical company is produced by Anhui Sinograce Chemical Co., Ltd.’s professional skills in high technology.