Shantou shantou price pressure sensitive adhesive industry pressure sensitive adhesive price due to the consumption of silica gel is a refined and after sterilization, can be directly when mixed with food according to the requirement and guarantees the drying of food and food to eat together, but without any poison to the human body.
(1) the fabric paste with hot melt adhesive ammonia 0 3%.
7 g 45 g note: distilled water levels in addition to ammonia for AR, the rest for CP [
Experiment results analysis editor carpet back with hot melt adhesive glue more basic materials for ethylene copolymer with other olefine monomers, such as ethylene -
Vinyl acetate acid copolymer and ethylene acrylate copolymer, etc.
(3) : late because of the small water molecules than solvent-based adhesive, can penetrate into the surface of the material smaller pore, equivalent to cast anchor in the material surface, its late on and solvent adhesive, with some suitable for cast anchor porous materials, such as mesh cloth and EVA, the late strength is better than solvent-based adhesive;
(3) glue barrel stacked shall not exceed 4 layer;
Avoid direct sunlight and rain;
3 type water-based glue suitable shoes and shoes (4) the warehouse should be set temperature and humidity meter, advice within 5 ∽ 30 ℃, temperature control and record every day, such as the temperature is beyond the scope suggested, should take timely improvement measures, to ensure that the water-based adhesive
The rapid development of the electronics industry to drive the further development of conductive adhesive.
Adhesive for sewing can reduce labor intensity, garment and clothing made of fine, fit, strong strong.
Used in fabric paste mainly include polyamide hot-melt adhesive, such as cheese and polyurethane.
The smell of the different enterprises have different testing standards, to simulate the hot melt adhesive application requirement is to smell method, such as the same amount of the same kind of hot melt adhesive in different size but same sealed in the jar, heated to a temperature point after how much time, take out the cooled to room temperature, open the lid and smell by testing personnel, it is concluded that the respective side value, record down, do three - over and over again
Five times, it is concluded that the average for the final test results.
(2) the lining cloth processing with hot melt adhesive market features: 3, can put the hot melt adhesive melt after testing the tensile strength, tensile strength of hot melt adhesive is not qualified.
Adhesive lining cloth is on fabric surface evenly Xu Bu made of hot melt adhesive.
When used to adhesive lining cloth cut into the required shape and size, to be coated with hot melt adhesive side with other fabric materials (
On the back of the hot-pressing bonding.
It lining in the clothing layer, as a skeleton of a garment, simplifies the clothing processing technology and time, make the garment with light, beautiful, comfortable, insurance type, washable, durable effect.
From the late 1970 s, hot melt adhesive to begin to enter to wood industry, used for sealing side, plywood core, plate joining together, such as furniture tenon joint, early hot melt adhesive equipment is mainly dependent on the United States, west Germany, Italy and other countries of equipment, along with the hot melt adhesive equipment has become increasingly mature, stable, selection and use is suitable for the hot melt adhesive equipments of the furniture factory details, not only can improve the quality of the furniture and class, and can improve the production efficiency, reduce the difficulty of the panel is renovated, reduce labor intensity.
Lining cloth processing general requirement for hot melt adhesive is a colorless, odorless, texture soft, rapid bonding, resistance to wet and dry wash, cannot have an effect on fabric, light resistance, etc.
Can use a variety of hot melt adhesive lining cloth processing, almost all types of hot melt adhesive can be used, with much is ethylene -
Vinyl acetate (
Hot melt adhesive, polyamide hot melt adhesive and high-pressure polyethylene (
Hot melt glue powder, and different USES of hot melt adhesive and processing methods are also different.
Shantou industry pressure sensitive adhesive prices have rods, granular shape.
Vinyl acetate copolymer (
(3) the carpet back glue with hot melt pressure sensitive adhesive glue shantou industry price so the food grade silica gel can be used as food, the external use of desiccant.
The manufacture marketing game of chemical company is changing with each innovation, and businesses of all products need to be ready to pounce.
chemical factory are the in thing today. To buy a for yourself do visit Anhui Sinograce Chemical Co., Ltd. at Sinograce Chemical.
There are ample scientific evidence of reducing the risk of chemical factory.
Before investing in a chemical factory chemical company, it can benefit to have an understanding of the different types of and the most effective strategies to chemical factory. Go to Sinograce Chemical for more tips.