Small make up teach you water-based glue specification operation: 1, before construction, first check whether the spray gun is in good condition, such as water should be ruled out in advance;
To stay away from fire and electrostatic when 2, the construction, the construction site within 50 meters shall not have other produce sparks or static electricity construction;
3, before the construction surface is clean, the material must not have sundry;
4, construction site ventilation works should have done before, open the doors and Windows;
5, using a spray gun, spray nozzle to the material surface evenly: * nozzle should be with material on the surface of the vertical;
* the nozzle from the material surface to 0.
* gun pressure should be adjusted to 6 & ndash;
* gun out evenly fan-shaped fog, fan-shaped Angle of about 45 degrees;
* spraying is better to glue layer covering material, short of gum rubber shoulds not be too thick or too thin;
Place 1-6, even after spraying,
2 minutes bonding (
Touch the fingering is not sticky paste) can be
7, spray gun need not when, should put the gun clean, tidy away;
8, some special material or process need glue layer after drying, reheat pressure glue, the glue can be adjusted according to customer requirements;
9, appropriately when bonding pressure, make the film adhesive
10, the influence of the bad coating: * rubber cover is too thin, easy to cause adhesion
viscous force is not enough;
* rubber is too thick, would increase the cost, slow drying speed, etc. , at the same time will cause the glue, affect bonding quality.
* sub uneven, can cause plastic product, part bounce off phenomenon.
As we have known for quite some time, the success of Sinograce Chemical in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
We believe our ability can raise a giant wave of innovation among the field of chemical company.
Once we have a good idea of how chemical company can satisfy customer’s needs, consider whether we should create a skill for their demands.
chemical company is sold in oversees market and has high reputation. Besides, our products are sold with reasonable prices.