Professional chemical products supplier

Wuhan industry adhesive factory

by:Sinograce Chemical     2021-01-30
Wuhan reclaimed rubber industry adhesive factory in wuhan industry adhesive factory, especially made from renewable natural rubber pressure-sensitive adhesive has good performance, the price is cheap, and therefore be taken seriously. Due to the particularity of pur polyurethane hot melt adhesive machine, also known as wet pur polyurethane hot melt adhesive curing reactive polyurethane hot melt adhesive, also known as wet cause sclerosis of reactive polyurethane hot melt adhesive, hereinafter referred to as pur hot melt adhesive, when used in hot melt such as contact with the water vapor in the air from curing reaction, therefore with pur hot melt adhesive machine need to air in the process of melting and the use of total isolation, pur hot melt adhesive machine is specially designed for polyurethane hot melt adhesive glue. You may need to know about pur polyurethane hot melt adhesive machine. After understanding the characteristics of the pur polyurethane hot melt adhesive, to understand the following maintenance is easy. Acid and alkali resistance. 4, ensure the pur hot melt adhesive machine operation under the specified voltage, if used by power supply voltage is different from the specified standards, may be the cause of hot melt adhesive machine was burned down. Wuhan industry adhesive factory traditional pressure sensitive adhesive with hygroscopicity, permeability and oxygen permeability is poor, and the compatibility of the skin is bad, use for a long time will appear on the skin damage skin tissue water phenomenon. 6, if the temperature is too low will cause the glue is not completely dry and prone to bad 'cohesion' wait for a phenomenon, or could be well at the time, but for a long time will still be 'drawing' and 'bad viscous force'; Repair glue is also called the repair glue, mainly applied in the metal, ceramic materials such as mending adhesive effect, common application for casting repair, can satisfy the requirements on the mechanical properties of the normal after repair. C, before using cleaning solvents, must check whether indoor air liquidity is good, avoid to use open flame, not under the environment of air does not flow cleaning pur hot melt adhesive machine. Wuhan industry adhesive factory six, moisture reactive polyurethane pur hot melt adhesive machine when use must pay attention to the items: nine, use pur hot melt adhesive machine special note: this product should be stored in a cool, dry place, control the temperature of 5 ℃ - 40 ℃ advisable, shelf life 6 months after PP film and glue the editor used machinery and equipment clean with clear water, improve the production environment, eliminate electrostatic fire accident oily products combined with process, ensure production personnel healthy PH 7. 0 to 8. Zero adjust the indicators, this product according to the laminating process when using, do not add water or other solvents if glue stick on the skin, can clean water and soap. In general, the mechanical properties such as pressure sensitive resistance of pressure sensitive adhesive for the addition of flame retardants. This is to develop early, since production is still a lot of kind of rubber pressure-sensitive adhesive. They are natural rubber elastomer as the main body, cooperate with viscosity-enhancing resin, softening agent, stabilizer, fillers and crosslinking ( Sulfide) Agent such as the complex mixture of additives, due to the natural rubber has both high cohesion strength and elasticity, and can very good miscibility with many viscosity resin, get high viscosity and good wettability of glued materials, so the natural rubber is ideal type of pressure sensitive adhesive main body material. Its main drawback is that there are unsaturated double bonds in molecules, poor light and oxygen aging resistance. But by crosslinking and use measures such as protective agent, can make its weather resistance and heat resistance improved. Made from natural rubber pressure-sensitive adhesive can almost all kinds of pressure sensitive adhesive products. Wuhan industry adhesive factory on the rubber components, from a single polyisobutylene gradually become styrene thermoplastic elastomer, improves the cohesive strength of the film; On the structure by 1 layer structure into a 2 layer structure, layer 2 components are different, different, increasing the service efficiency of pressure sensitive adhesive. 1. Four characteristics of the hot melt adhesive curing speed, curing several seconds, cooling heating molten, sticky characteristics, facilitate continuous, automatic high-speed operation, improved the production efficiency and reduces the cost; Solids and contains no solvents, non-toxic environmental protection, energy saving, won't produce secondary pollution to the environment; Non reactive hot melt adhesive can be repeatedly melt adhesive, especially suitable for some special technical requirements of component adhesive, as some of the cultural relics repair; Three, pur hot melt glue machine for rubber considerations: 1, the installation and use of pur hot melt adhesive machine, other debris must not be placed on the body or used as padding instruments. (5) wallpaper paste. Wuhan industry adhesive factory with a clean, wet cloth on the area.
Anhui Sinograce Chemical Co., Ltd. have long believed that management practices are an important element in productivity.
Looking for someone to handle your chemical company chemical factory needs? Check out Sinograce Chemical today for more information.
It is never too late to have a new mindset and to get things moving in the right direction. Choose Anhui Sinograce Chemical Co., Ltd. to be your quality provider.
need fuel for energy,while chemical factory do not.
As consumers get more and better information regarding how to compare various products and companies, it is critical to compete on the price and value of chemical company.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...