Wuhu wuhu henkel hot melt adhesive factory henkel this product belongs to the hot melt adhesive factory, transportation conform to the product transportation rules, completes the antifreeze in the process of transportation,
The temperature should be greater than 5 ℃)
, prevent the rain exposure to the sun and other applicable to PP aluminized paper combined with solid composition of 50 + / - 2% (
5℃/ 3 h)
Considerations for the health and safety of packaging and storage is suitable for food packaging adhesive solids - 20
Styrene - 40%
Styrene block material (
And styrene -
Styrene block material (
Thermoplastic elastomer is represented by the main raw material of manufacturing hot melt pressure sensitive adhesive.
Physical and chemical bonding effect, the overall strength of adhesion
after carton, carton is not easy to deformation and cracking.
In addition, hot melt adhesive coating system can be to press the rubber coated in different shape of key parts, such as: cartons cover fold.
2, should guarantee the pur hot melt adhesive machine using the environment clean, pur glue machine on the pressure plate can not have infusible solid, impurities, iron filings, screw, wire head, hard sharp objects such as solid content.
Three, printing ink, glue viscosity change brings to the purchasing question modification: four, automotive electronic melting point: 105 -
115 ℃ : melt index: 18
Size: 80 -
120 mesh food with silica gel is made from silicate polycondensation of inorganic polymer gel material, ingredient is SiO2 · nH2O, its content is over 98%, avirulent insipidity, stable chemical performance, under the normal except hydrofluoric acid and caustic, not any response from the acid and alkali salt.
Second, poor adhesive with good low temperature resistance, cold climate in the north, does easy to glue;
Hot melt adhesive, good low temperature resistance, resistant to -
40 ℃ low temperature.
And the storage life of hot-melt adhesive for 2 years, store covers an area of small, no special storage requirements;
And tape storage is valid only for half a year, also requires a certain storage conditions, otherwise easy to spoil.
In the 21st century, the development direction of industrial glue is embodied in the following nine aspects.
In addition, hot melt adhesive also provides a good anti-theft function, due to the adhesive penetration into the corrugated any attempt to open the carton will tear fiber.
Tape available knife cut, in imperceptible in take contents and sealing again.
Wuhu henkel hot melt adhesive sealing glue factory for all kinds of polishing, polishing, pressure light, PP compound such as PET, PP transparent box, adhesive film, non-woven products, box packaging, food packaging, cigarette packaging, furniture edge banding tetra beverage packaging, assembly, electronic industry, automobile interior trim seal, headlights, windshield assembly, etc. )
, non-woven pads, diapers, diapers, insoles, disposable supplies, paper coating composite trademark, label double-sided adhesive tape, glue plate, flypaper, wooden floor and carpet glue, bandages, medical, color box packaging, carton packaging with breathable tape glue, back adhesive to stick material such as the cingulate has strong adhesive force;
Good thermal stability, no impurities, good operation;
Aluminum foil sealing characteristics of the hot melt adhesive unique water resistant, waterproof.
And the successful application of adhesive can promote advanced heat resistant, high strength composite materials, such as carbon fiber, boron fiber could be used in the aviation industry, the aircraft structure was further improved.
Appearance: wuhu henkel hot melt adhesive factory 1, when cleaning pur polyurethane hot-melt adhesive machine, you must first make the hot melt adhesive plate away from the pur hot melt glue barrel and pur polyurethane hot melt adhesive glue barrel with pur hot-melt adhesive machine, after the hot dish out should be in keeping the lift cylinder under the condition of internal pressure, cut off all the power.
3 acid ester emulsion pressure sensitive adhesive, preparation, to choose the appropriate soft and hard monomers and dosage, the soft and hard monomer ratio, appropriate to pressure sensitive adhesive bonding performance and cohesion strength coordination and balance, but for pressure sensitive adhesive, is also important to the choice of the functional monomer, it can increase the cohesion of the pressure sensitive adhesive, improved adhesion with the substrate, and provides further crosslinking active group.
Goods packaging in transmission nowadays, businesses at the same time, through the packaging pattern design can also communicate product and company image.
Therefore, appearance factors hindering the research on the role as little as possible.
Packing tape often block image, interference information transfer;
And hot melt adhesive bonding between folding wing, can provide larger display space.
Shipbuilding industry, led by aviation industry, machinery industry has become the main power to promote the development of modern adhesive, the amount of single adhesive often marks the level of a nation's aircraft manufacturing process.
Wuhu henkel hot melt adhesive factory epoxy resin epoxy resin with low shrinkage rate, resistance to mildew, properties, such as stable point.
Since it is a kind of colloid structure, so lots of pores and large specific surface area.
Anhui Sinograce Chemical Co., Ltd. specializes in undertaking corporate offers to cater the needs of different companies.
is a chemical factory chemical company provided by Anhui Sinograce Chemical Co., Ltd. which is a leading manufacturer in China. For more information, visit Sinograce Chemical.
Anhui Sinograce Chemical Co., Ltd. clearly knows that people often launch something and love it and want to go on and on about it, but that's too normal and mediocre. There are lots of other competing products, so we need to keep it very, very unique.