Xi 'an boss how pressure sensitive adhesive
xian boss pressure sensitive adhesive has good emulsification, dry wet, scattered, decontamination and antistatic ability, has good hard water resistance.
Pva water-based adhesive, vinyl acetate, water-based adhesive, acrylic water-based adhesive, polyurethane water-based adhesive, water-based adhesive, water-based phenolic epoxy adhesive, organic silicon water-based adhesive, rubber water-based adhesive.
How about xi 'an boss pressure sensitive adhesive for hot melt adhesive, highly processed adhesive will not cause downtime;
While replacing tape need downtime.
2. According to the application of classification: but by crosslinking and use measures such as protective agent, can make its weather resistance and heat resistance improved.
Packaging used in water-based adhesive, water-based adhesive, car use water-based adhesive, shoes, daily use water-based adhesives water-based adhesive xi 'an boss how pressure sensitive adhesive with a clean, wet cloth on the area.
On the rubber components, from a single polyisobutylene gradually become styrene thermoplastic elastomer, improves the cohesive strength of the film;
On the structure by 1 layer structure into a 2 layer structure, layer 2 components are different, different, increasing the service efficiency of pressure sensitive adhesive.
3. According to the classification of solvent properties of water-soluble and emulsion adhesives with modified after understanding the characteristics of the pur polyurethane hot melt adhesive, to understand the following maintenance is easy.
1, water-borne polyurethane
Adhesive APU is water instead of organic solvent as a new type of polyurethane dispersion medium system, also known as polyurethane or water-based polyurethane water dispersion of polyurethane, river systems.
Waterborne polyurethane with water as solvent, no pollution, safe and reliable, excellent mechanical properties, good compatibility, easy modification.
Xi 'an boss how pressure sensitive adhesive can be used with all kinds of surface active agent.
If stubbornly use to save cost and do not take tone of hot melt adhesive performance and its process, the product the effect of the adhesive is certainly disappointing.
If seriously, or by hot melt adhesive to the area wide, may cause casualties or injuries place can have the trend of inflammation, you must keep the injured body temperature in normal condition, and then immediately sent the injured to hospital.
The APU adhesive non-toxic pollution-free, high molecular weight so that it can form good performance of the adhesive film, it has good low temperature resistance, good flexibility, adhesive ability and the advantages of wide range of physical properties of the film can be adjusted;
Flexible chain, has in its molecular structure shows good impact resistance, fatigue resistance, low temperature resistance, also has the design, the performance of rubber from the flexible and rigid arbitrary adjustable, can meet the demand of adhesion between different materials;
Is comparatively mature methods for the preparation of aqueous polyurethane adhesives, mainly has the following several ways: xi 'an boss pressure sensitive adhesive gives how to simply add reactive flame retardant monomer acrylic pressure sensitive adhesive permanent flame retardancy.
You may need to know about pur polyurethane hot melt adhesive machine.
The traditional pressure sensitive adhesive with hygroscopicity, permeability and oxygen permeability is poor, and the compatibility of the skin is bad, use for a long time will appear on the skin damage skin tissue water phenomenon.
Xi 'an boss how pressure sensitive adhesive if you use the pur hot melt adhesive machine skin is in the process of high temperature liquid pur hot melt adhesive, then please do not try to pur hot melt adhesive by wiping off skin, instantly will be injured at the same time, or rinse in clean, cold water for a until the dust on the skin of pur hot melt adhesive cool completely.
The production line process step-by-step, but each working procedure is with hot melt adhesive for solid by liquid cooling time involved is great.
Anhui Sinograce Chemical Co., Ltd. thinks that customer satisfaction is one of the most important determinants of brand loyalty. High-quality service can be the difference between a one-time buyer and a lifelong repeat customer.
Try out chemical factory chemical company to beautify your chemical factory. Visit Sinograce Chemical to get your dreaming at a favorable price.
Through our distribution and marketing competencies, Anhui Sinograce Chemical Co., Ltd. provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the chemical company company of choice.