direct zhenjiang authorized adhesive direct selling 100 PPM allowable concentration in the air.
Oily coating adhesive is oily solvent (
Toluene, DMF, butanone, etc. )
As a solvent, dissolve or polyurethane acrylate.
Its advantage is good film forming, good color fastness, PU can stick hot glue, is the current commonly used coating glue.
Defect is due to the use of the oily solvent, so environmental protection lacking a bit, especially now that oil prices, oil solvent prices soaring all the way, most of the coating glue due to the cost is too high, so use more bad of the oily solvent, leading to environmental protection is not up to standard, in addition with the national environmental standards to further improve, so for environmental requirements of the coating adhesive is higher and higher.
Very slightly soluble in water, soluble in many organic solvents.
Are countries with a deficiency of timber in our country, in addition to a small amount of high-grade furniture use real wood, furniture mostly usually use fiber board, wood shavings or sawdust plate production, and furniture plate edge parts must use hot melt adhesive to glue sealing side materials, increase the aesthetic feeling, like solid wood furniture.
Hot melt adhesive is a kind of plastic adhesives, to a certain temperature range with the temperature change and change its physical state, and chemical properties unchanged, its non-toxic tasteless, environmentally friendly chemical products.
Is the use of hot melt glue by heating the hot melt adhesive, hot melt adhesive machine melt glue after become a kind of liquid, by hot melt adhesive machine hot melt rubber hose and hot melt glue gun, to be adhesive surfaces, hot melt adhesive cooling after completed the glue.
Compared with other pressure sensitive adhesive, acrylate pressure sensitive adhesive with the following features: almost without adding stabilizer has excellent weather resistance and heat resistance;
No phase separation and migration phenomenon, good transparency, good oil resistance;
No effect to the skin, suitable for field.
A hot melt adhesive, polyurethane hot melt adhesive curing sex and functional hot melt adhesive is two kinds of new product on the market.
Water-based glue process characteristics of the following is hot melt sealant.
(1) using water-based glue, in line with the shoe industry, a long-term trend in brands actively, water-based adhesive
has been widely used all kinds of shoe factory, water-based glue quality gradually progress and stability;
Zhenjiang authorized adhesive direct melting point -
Characteristics: good sealing effect, easy quality assurance;
Without curing period, save area;
Is environmental protection product, the use of no waste, clean environment;
Save time, raw materials, personnel, reduce the production cost.
(2) use water-based glue will lead to environmental protection, health, save energy, save cost of equipment and manpower, fire safety, etc;
Search the public number: WPU -
88 China adhesive platform 8 May use a variety of hot melt adhesive lining cloth processing, almost all types of hot melt adhesive can be used, with much is ethylene -
Vinyl acetate (
Hot melt adhesive, polyamide hot melt adhesive and high-pressure polyethylene (
Hot melt glue powder, and different USES of hot melt adhesive and processing methods are also different.
(3) cost: water-based glue consumption is 1/3 of solvent-based glue, if the water 3 times of unit price shall not exceed the solvent adhesive, replace solvent-based adhesive with water-based glue will not increase costs, as oil prices rise, the cost of the solvent adhesive is bigger than water-based glue rise, in the long run, water-based glue process cost lower than that of solvent adhesive process.
Zhenjiang authorized direct adhesive class acrylate pressure-sensitive adhesive by crosslinking state can be classified as crosslinking and crosslinking type;
According to the form and can be divided into the emulsion type and solvent type, hydrosol, to divest type, radiation type and hot melt type, etc. 6.
Boiling point l01 ℃.
Water-based adhesive introduced in zhenjiang authorized adhesive direct flammable, with high fever, has caused the burning flame, strong oxidizer.
Anhui Sinograce Chemical Co., Ltd. thinks that that firms can avoid the artificial choice between quantitative and qualitative risk management, allowing both to play important roles in surfacing and assessing risks.
Anhui Sinograce Chemical Co., Ltd.’s mission is to use our extensive chemical company experience to deliver tangible business results enabling our clients in industry and government to profit from the advanced use of technology. We strive to build long-term client relationships based on mutual trust and respect.
Anhui Sinograce Chemical Co., Ltd. can assure that it is one of the best products in the market at present.
Regularly improving chemical company in accordance with customer feedback is a great way to show your brand listens and cares.
Anhui Sinograce Chemical Co., Ltd. clearly knows that people often launch something and love it and want to go on and on about it, but that's too normal and mediocre. There are lots of other competing products, so we need to keep it very, very unique.